Fire protection trade estimating
Fire Sprinkler Estimating Services
Accurate estimates for wet, dry, pre-action and deluge sprinkler systems, standpipes and fire pumps, under NFPA 13, 13R and 13D, for Florida residential, commercial and high-rise projects.
- Head counts by type and hazard
- Mains, branch lines, risers and standpipes
- Fire pumps, backflow and FDCs
Free quote
Send plans. Get a firm quote.
- Quote back after a quick plan review
- Typical delivery in 24–48 hours
- Excel estimate + marked-up drawings
- Priced to Florida labor and material rates
Or email ask@floridamepestimating.com
24–48 hr typical turnaround
NDA-protected plans
Florida Building Code aware
Florida labor & material pricing
Overview
Fire sprinkler estimates that match the hydraulic design
Fire sprinkler scope looks repetitive, but the cost depends on details: hazard classification, head spacing, pipe schedule and joining method, riser and standpipe layout, and whether a fire pump is needed. On many projects, bidders work from preliminary layouts before the hydraulic design is complete, which makes a careful estimate even more important.
We estimate sprinkler systems by counting heads by type and finish, measuring mains and branch lines by size, and pricing risers, valves, standpipes, fire department connections, backflow and fire pumps. Where only architectural drawings are available, we lay out the system to the applicable NFPA standard and list our assumptions.
We also estimate the related fire alarm and firestopping scopes so the full fire protection package is covered.
What's included
Sprinkler scope we estimate
- Sprinkler heads by type, response and finish
- Branch lines and mains by size and schedule
- Risers, zone valves and inspector's test assemblies
- Standpipes, hose valves and cabinets
- Fire pumps, jockey pumps and controllers
- Backflow preventers and fire department connections
- Dry pipe and pre-action valves and compressors
- Hangers, seismic/wind bracing and supports
- Flow and tamper switches (with alarm coordination)
- Hydraulic calculations and shop drawings (allowance)
- Hydrostatic testing and flushing
- Permits and fire marshal inspections
System types
Sprinkler systems we price
NFPA 13D residential
One- and two-family homes with multipurpose or standalone systems.
NFPA 13R multifamily
Low- and mid-rise apartments, condos and senior living.
NFPA 13 commercial & high-rise
Offices, hotels, hospitals and towers with standpipes and fire pumps.
Storage & warehouse
High-piled storage, ESFR and in-rack systems.
Dry & pre-action
Freezers, data rooms, archives and special hazards.
Retrofits
Adding sprinklers to existing buildings and high-rise retrofits.
Florida factors
Fire sprinkler work in Florida
Florida’s Fire Prevention Code, local fire marshals and the state’s large high-rise and multifamily market all shape sprinkler costs. High-rise residential and hotel towers need standpipes, fire pumps and careful riser design. Many older condo buildings have also faced sprinkler and life-safety upgrade requirements, which creates retrofit work in occupied buildings.
Florida warehouses and distribution centers, growing quickly along the I-4 and I-75 corridors, often need ESFR or in-rack systems with large fire pumps and water storage. We price these systems based on the commodity and storage arrangement shown, and flag where the hydraulic design could change the number.
At a glance
Fire sprinkler estimate breakdown
| Section | Includes |
|---|---|
| Underground / service | Fire line, backflow, FDC, PIV (if in scope) |
| Risers & valves | Riser assemblies, zone valves, test drains |
| Distribution | Mains, branch lines, fittings, hangers |
| Heads | By type, temperature, finish and coverage |
| Pumps & standpipes | Fire pump, controller, standpipes, hose valves |
| General | Design, permits, testing, inspections |
Scope gaps we catch
Fire sprinkler gaps we catch
Sprinkler estimates often miss items outside the head count. We price items like these.
- Sprinklers above and below obstructions such as wide ducts
- Dry sprinklers at canopies and freezers
- Auxiliary drains and inspector's test connections
- Fire pump test headers and flow meters
- Hydraulic design, shop drawings and permit fees
- Ceiling removal and patching on retrofits
Our process
How our MEP estimating process works
- 01
Send your plans
Upload PDFs, CAD files or a bid-portal link with specs, addenda and the bid date. A quick scope note helps.
- 02
Get a fixed quote
We confirm scope, price and delivery date before any work starts. No surprises on the invoice.
- 03
Takeoff & pricing
Estimators count and measure every MEP item, then price labor and material for the project's Florida location.
- 04
Senior QA review
A second estimator checks quantities, scope gaps and math against the drawings and specs.
- 05
Bid-ready delivery
You get the Excel estimate, marked-up drawings and a clarifications list you can send with your bid.
FAQs
Frequently asked questions
Straight answers to what contractors usually ask before sending plans. Don’t see your question? Call or email us.
Can you estimate before the hydraulic calcs are done?
Yes. We lay out the system to the applicable NFPA standard and hazard, then note that final pipe sizes depend on the hydraulic design.
Do you count heads by type?
Yes. Heads are counted by type, response, temperature rating and finish, including concealed and sidewall heads.
Do you include fire pumps?
Yes, when required, including the pump, controller, jockey pump, test header and related piping.
Can you price CPVC vs. steel?
Yes. Where allowed, we can price CPVC and steel options for light-hazard and residential systems.
Do you estimate retrofits in occupied buildings?
Yes. Retrofits include premiums for occupied work, ceiling removal and patching, and phasing.
What's your turnaround?
Most sprinkler estimates are delivered within 24 to 48 hours; high-rise and warehouse projects get a confirmed date.
Keep exploring
Related estimating services
Estimating services
MEP trades
Have plans on your desk? Get your MEP number before the bid date.
Send the drawings today and we will confirm price and delivery before any work starts.
Start here
Get a free MEP estimating quote
Upload your drawings and tell us what you need. We review the plans, confirm scope and send a price and delivery date. Your files stay confidential.
- Call1 (816) 683-1595
- Office349 State Ln, Orlando, FL 32801