Mechanical trade estimating
Piping Estimating Services
Accurate piping takeoffs and estimates for hydronic, refrigerant, condensate, steam, gas and plumbing systems, with fittings, valves, supports and labor priced by size and material.
- Copper, steel, CPVC, PEX, PVC and stainless
- Fittings, valves and joints counted
- Labor by joint type and pipe size
Free quote
Send plans. Get a firm quote.
- Quote back after a quick plan review
- Typical delivery in 24–48 hours
- Excel estimate + marked-up drawings
- Priced to Florida labor and material rates
Or email ask@floridamepestimating.com
24–48 hr typical turnaround
NDA-protected plans
Florida Building Code aware
Florida labor & material pricing
Overview
Piping is priced by the joint, not just the foot
Two pipe runs of the same length can have very different costs. One is a straight main with a few fittings; the other is a congested mechanical room with valves, strainers and tees every few feet. Labor is driven by joints, size and material, which is why piping estimates built only on linear footage miss so badly.
We take off piping by system, size and material, counting fittings, valves, specialties, hangers and joints. Labor is calculated by joint type, such as soldered, brazed, threaded, grooved, welded or press-fit, with factors for height and access. You get a detailed estimate you can check against the drawings.
Industrial and process systems have their own requirements; see process piping estimating for spec-driven work.
What's included
Piping systems we estimate
- Chilled water and heating hot water
- Condenser water and cooling tower piping
- Refrigerant piping and line sets
- Condensate drains and pumps
- Steam and condensate return
- Natural gas and propane
- Domestic water and plumbing piping
- Compressed air and vacuum
- Valves, strainers, gauges and specialties
- Expansion joints and anchors
- Hangers, supports and seismic/wind bracing
- Pressure testing, flushing and treatment
Florida factors
Piping on Florida projects
Florida’s climate puts extra demand on chilled water and condensate systems. Chilled water piping needs well-sealed insulation to prevent sweating, and condensate drains need proper slope, traps and overflow protection. Outdoor piping near the coast needs corrosion protection and UV-resistant jacketing.
Large Florida projects increasingly use grooved and press-fit systems to cut labor, especially in a tight skilled-labor market. We price the joining method specified and can show alternates if you’re considering a change.
At a glance
Labor drivers we account for
| Driver | Why it matters |
|---|---|
| Joint method | Welded, grooved, threaded and press-fit joints take very different time |
| Pipe size | Labor per joint rises sharply with diameter |
| Material | Copper, steel, stainless and plastic each install differently |
| Elevation and access | High work and congested rooms reduce productivity |
| Testing | Hydrostatic and pneumatic tests add time per system |
Scope gaps we catch
Piping estimate gaps we catch
Piping estimates built on linear footage alone miss most of the labor. We count items like these.
- Every fitting and joint by size and joining method
- Valves, strainers, gauges and thermometers at equipment
- Expansion loops, anchors and guides
- Dielectric unions and transitions between metals
- Pipe identification, labeling and valve tags
- Flushing, cleaning and water treatment
Our process
How our MEP estimating process works
- 01
Send your plans
Upload PDFs, CAD files or a bid-portal link with specs, addenda and the bid date. A quick scope note helps.
- 02
Get a fixed quote
We confirm scope, price and delivery date before any work starts. No surprises on the invoice.
- 03
Takeoff & pricing
Estimators count and measure every MEP item, then price labor and material for the project's Florida location.
- 04
Senior QA review
A second estimator checks quantities, scope gaps and math against the drawings and specs.
- 05
Bid-ready delivery
You get the Excel estimate, marked-up drawings and a clarifications list you can send with your bid.
FAQs
Frequently asked questions
Straight answers to what contractors usually ask before sending plans. Don’t see your question? Call or email us.
Do you count every fitting?
Yes. Fittings, valves and specialties are counted by type and size from the drawings.
Can you price alternate joining methods?
Yes. We can price press-fit or grooved alternates against soldered or welded systems.
Do you include insulation?
Pipe insulation can be included or listed separately. See insulation estimating.
Do you estimate gas piping?
Yes, natural gas and propane piping with regulators, valves and appliance connections.
Can you report quantities by system?
Yes. Quantities are grouped by system and area so you can purchase and schedule by phase.
What turnaround is typical?
Most piping estimates are delivered in 24 to 48 hours; larger projects receive a confirmed delivery date.
Keep exploring
Related estimating services
Estimating services
MEP trades
Have plans on your desk? Get your MEP number before the bid date.
Send the drawings today and we will confirm price and delivery before any work starts.
Start here
Get a free MEP estimating quote
Upload your drawings and tell us what you need. We review the plans, confirm scope and send a price and delivery date. Your files stay confidential.
- Call1 (816) 683-1595
- Office349 State Ln, Orlando, FL 32801